.pdf version
 
    NSI-300V-8x8
8' x 8' (2.4 m x 2.4 m) Vertical Planar Near-field Measurement System

DESCRIPTION

The 300V-8x8 is an ideal system for measuring medium and high gain antennas (>15 dBi) with medium sized apertures making it suitable for testing medium arrays or reflector antennas.
The 300V-8x8 is based on an inverted "T" design and is constructed of steel. For high stability a welded dual-pontoon base is used. This robust design is easy to assemble and align, highly accurate, and can be dismantled for transport or storage in one day. The high capacity probe carriage can accommodate probes as large as a WR-650.
CAPABILITIES

The system interfaces with a wide variety of RF equipment and is capable of measuring amplitude and phase patterns from mid-range L-band to mmWave bands. The system includes NSI Antenna Measurement Software.

The system software runs on a Pentium based measurement workstation and provides automatic setup of scans based on measurement parameters and desired output. Measured data can be processed for far-field or holographic patterns yielding complete characterization of the antenna’s performance. A single data set provides information on antenna gain, side lobe structure, beam pointing and cross polarization.

The Model 300V-8x8 can be supplied with a variety of options to enhance system performance, such as cylindrical or spherical options to accommodate lower gain antennas.
FEATURES
  • High Accuracy Planarity <0.003"(0.076 mm) RMS
  • 8' x 8' (2.4 m x 2.4 m) Scan Area
  • Precision Rack and Pinion Drive
  • Mid-range L-band to mmWave Measurements
  • Inverted “T” Frame Design for High Accuracy
  • Far-field, Near-field and Holographic Patterns
  • Cylindrical and Spherical Options Available

SPECIFICATIONS
Construction
 Inverted “T” Frame (steel)
Drive System
 Precision Stepper Motor; Rack and Pinion
Scan Area
 8’x 8’ (2.4 m x 2.4 m)
Planarity
 <0.003” (0.076 mm) RMS
Corrected Planarity (Requires optional Structure Correction Software and Probe Translation Stage)
 <0.001” (0.025 mm) RMS
Resolution (x,y) 0.001” (0.025 mm)
Position Repeatability 0.002” (0.05 mm) RMS
Scan Speed (X-Y) X - 10 in/s (0.25 m/s)
Y - 15 in/s (0.38m/s)
Probe Carriage Capacity 50 lbs. (22.7 kg) maximum recommended, WR650
System Controller NSI controller with parallel I/O, and serial interface
Measurement Workstation Measurement workstation computer with large LCD monitor
Stepper Motor Power Amplifier EIA 19” rack mount. (7” high x 14” deep)
Motor Cables Quick-connect; 40’ (12 m)
Scanner Absorber X-Y Absorber Kit (8” pyramidal cone)
Probe WR90 Open-ended Waveguide Probe SMA (f) transition & Pyramidal absorber (3")
Probe Mount Angle Bracket - allows mounting probe in “V” or “H” orientation
RF Cables Qty 5 - Flexible 15’ (4.6 m) with SMA (m-m) coaxial connectors; DC-20 GHz
Supported RF Devices NSI Panther Receiver Subsystem or selection of Agilent, Rohde & Schwarz and Anritsu VNA's (contact NSI for a complete list)
Power 100-240 VAC switchable, 47-63 Hz, 500 watts

Typical images of NSI-300V-8x8 Scanner

DIMENSIONS

  • Width - 147" (3.7 m)
  • Depth - 70" (1.8 m)
  • Height - 158" (4.0 m)
  • System Weight - 2 400 lbs (1 087 kg) approx.
LINKS
  • No additional links are curently available.
    •
ORDERING INFORMATION

NSI-300V-8x8 - 8' x 8' (2.4 m x 2.4 m) scanner system including X-Y stepper motor driven scanner with dual rail steel base, motor cable set, controller, PC based measurement workstation, motor drive electronics, NSI antenna measurement software, installation tool kit, system documentation and operation manual.

OPTIONS

Opt 100 - 220VAC 50 Hz Operation
Opt 101 - European Version
NSI-SC-5621E - Probe Translation Stage, Extra Heavy Duty, 10 inch (250 mm) Travel
NSI-SC-5631 - Probe Roll Stage (High Capacity) with 26.5 GHz rotary joint
NSI-SW-5301 - Upgrade NSI Standard Edition Software to Professional
NSI-SW-5105 - Motion Tracking Interferometer (MTI) Software

For additional options and information see Scanner Options and Accessories
Nearfield Systems, Incorporated
19730 Magellan Drive, Torrance, CA 90502, USA, Tel: 310.525.7000, Fax: 310.525.7100
Email: sales@nearfield.com. Visit our website: www.nearfield.com