High Speed Synthesizer

The NSI 9020 Panther High Speed Microwave Synthesizer is designed specifically to address the demanding needs of the antenna test community. The Panther 9020 is a high performance synthesizer designed for high-speed frequency switching applications. The 9020 is compatible with a wide variety of receivers, including the NSI Panther 9000.

Up to 6,667 frequencies per second (150 µs/pt.) - reduces antenna test time and improves range productivity Frequency Range 0.1 to 20.0 GHz Power output up to +14 dBm typical, adjustable in 1 dB steps Compatible with a variety of receivers Built-in pulse modulator with TTL modulation input

Remote operation with 30 m (100') control cable Fully integrated with NSI 2000 antenna measurement software Resolution:  10 Hz Parallel BCD interface and ethernet control

The Panther 9020 Synthesizer has both Ethernet and parallel BCD interfaces. The Ethernet interface may be used to control frequency and power output, and has the ability to manage a list of up to 4096 frequencies. In this mode, the Panther 9020 can step through the frequency list, commanded by triggers through the rear panel trigger connector. When used with the Panther 9000 beam controller, the parallel BCD interface can be used for direct frequency control. The beam controller manages the frequency list, and the synthesizer immediately steps to the frequency commanded at the parallel input.

NSI provides full program support for the Panther 9020 with its NSI 2000 Antenna Measurement Software. For other applications, NSI provides the drivers required for integration with the Panther 9000 receiver. For stand-alone applications, NSI provides the Ethernet and differential BCD control interface definitions.

Power Out	+14 dBm typical, adjustable in 1 dB steps to -15 dBm
Frequency Range	0.1 to 20.0 GHz
Frequency Switching Speed	6,667 frequencies per second (150 µs/pt.)
Frequency Resolution	10 Hz
Harmonics	< -50 dBc, typical
Phase Noise	-85 dBc/Hz at 1 kHz offset
Subharmonics	< -55 dBc
Spurious	< -60 dBc
Frequency Stability	3x10E-9/ °C
Software Interface	Support for NSI Antenna Measurement Software and Panther 9000 Receiver
Computer Interface	Differential BCD / Ethernet
List Mode	Up to 4096 points
RF Outputs	SMA female
Size (HxWxD)	3.50" x 19.0" x 22.0"
Controls and Indicators	DC power indicator, pulse mode enabled, input trigger
Frequency Reference In	10 MHz, BNC connector
Frequency Reference Out	10 MHz, BNC connector
AC power	100-120/200-240 VAC, 50/60 Hz