 |
 |
|
|
RF
Accessories
PIN
Switches, Rotary Joints, Flex
Cables, Flex Cable Upgrades, Amplifiers,
Frequency Multipliers, Multiplier-Amplifier-Coupler
Plates
PIN
Switches
| Model |
Ports |
Frequency |
| NSI-RF-5440 |
SP2T |
1-18
GHz |
| NSI-RF-5441 |
SP4T |
0.3-18
GHz |
| NSI-RF-5442 |
SP8T |
0.5-18
GHz |
| NSI-RF-5443 |
SP4T |
0.045-50
GHz |
| NSI-RF-5444 |
SP16T |
1-18
GHz |
| NSI-RF-5445 |
SP2T |
0.045-50
GHz |
| NSI-RF-5446 |
SP8T |
0.045-50
GHz |
| NSI-RF-5447 |
SP16T |
0.045-50
GHz |
| NSI-RF-5448 |
SP8T |
2-26.5
GHz |
| NSI-RF-5449 |
SP12T |
1-12
GHz |
| NSI-RF-5451 |
SP2T |
0.1-40
GHz |
| NSI-RF-5452 |
SP4T |
0.1-40
GHz |
| NSI-RF-5453 |
SP8T |
0.1-40
GHz |
| NSI-RF-5901 |
Switch Control Unit (SCU) for Agilent Pin Switches |
Top
Rotary
Joints
| Model |
Description |
| NSI-RF-5934 |
Rotary
Joint, DC-50 GHz |
| NSI-RF-5966 |
Rotary
Joint, DC-40 GHz |
| NSI-RF-5923 |
Rotary
Joint, DC-26.5 GHz |
| NSI-RF-5924 |
DC-40
GHz Rotary Joint Kit for pol stage |
| NSI-RF-5924-50 |
DC-50
GHz Rotary Joint Kit for Pol Stage |
| NSI-RF-5902 |
Phase
Stable Dual Rotary Joint System, DC-26.5 GHz |
| NSI-RF-5903 |
Phase
Stable Dual Rotary Joint System, DC-40 GHz |
Top
Flex
Cables
| Model |
Length |
Frequency |
Connectors |
| NSI-RF-5461 |
5
ft. |
DC-26.5
GHz |
SMA(m) |
| NSI-RF-5462 |
10
ft. |
DC-26.5
GHz |
SMA(m) |
| NSI-RF-5463 |
15
ft. |
DC-26.5
GHz |
SMA(m) |
| NSI-RF-5464 |
15
ft. |
DC-40
GHz |
2.9mm(m) |
| NSI-RF-5466 |
10
ft. |
DC-40
GHz |
2.9mm(m) |
| NSI-RF-5467 |
35
ft. |
DC-18
GHz |
SMA(m) |
| NSI-RF-5468 |
30
ft. |
DC-18
GHz |
SMA(m) |
Top
Flex
Cable Upgrades
| Model |
Description |
| NSI-RF-5465 |
200V-
RF Cable upgrade to 40 GHz |
| NSI-RF-5465-12 |
300V-12x12
RF Cable Upgrade to 40 GHz |
| NSI-RF-5465-15 |
300V-15x15
RF cable upgrade to 40 GHz |
| NSI-RF-5465-8 |
6x6
and 8x8 RF Cable Upgrade to 40 GHz |
| NSI-RF-5469 |
200V-
RF Cable upgrade to 50 GHz |
| NSI-RF-5465-12 |
300V-12x12
RF Cable Upgrade to 50 GHz |
| NSI-RF-5465-15 |
300V-15x15
RF cable upgrade to 50 GHz |
| NSI-RF-5465-8 |
6x6
and 8x8 RF Cable Upgrade to 50 GHz |
Top
Amplifiers
| Model |
Description |
| NSI-RF-5959 |
LO
Amplifier, 1 - 20 GHz |
| NSI-RF-5937 |
Amplifier,
18 - 40 GHz,
Output
power 17 dBm typical @ 1 dB compression,
Gain 30 dB minimum,
Connectors: 2.9 mm (f),
Supply: 12 V DC, 450 mA max. |
| NSI-RF-5939 |
Amplifier,
2 - 18 GHz
Gain: 25 dB min, 27.5 dB typical
Output Power: +10 dBm min, +15.5 dBm typical
Input/Output VSWR: < 2.5:1 typical
Reverse Isolation: 60 dB typical |
| NSI-RF-5953 |
Amplifier,
0.1 - 20 GHz
Gain = 24 dB
P1dB = +17 dBm
SMA(f) connectors
Includes enclosure and power supply |
| NSI-RF-5968 |
Amplifier,
1 - 20 GHz
Gain = 40 dB min
P1dB = +15 dBm typ (1-15 GHz)
P1dB = +12 dBm typ (15-20 GHz)
SMA(f) connectors
Includes enclosure and power supply |
| |
|
Top
Frequency
Multipliers
| Model |
Description |
| NSI-RF-5928 |
X-2 Multiplier,
20-40 GHz out |
| NSI-RF-5935 |
X-2 Multiplier,
3.0-4.0 GHz out |
| NSI-RF-5936 |
X-4
Multiplier, 33-50 GHz out |
| NSI-RF-5954 |
X-2
Multiplier, 18-26.5 GHz out |
Top
RF
Multiplier-Amplifier-Coupler Plates
| Model |
Description |
| NSI-RF-5992 |
RF Amplifier-Coupler Plate, 1-20 GHz
- Amplifier, 20 GHz Coupler on Mounting Plate
- 2nd unit can be used to avoid moving for TX/RX
switching
- Can be upgraded at NSI factory to 40 or 50 GHz |
| NSI-RF-5993 |
RF Amplifier-Coupler Plate, 1-26.5 GHz
- Amplifier, 26.5 GHz Coupler on Mounting Plate
- 2nd unit can be used to avoid moving for TX/RX
switching
- Can be upgraded at NSI factory to 40 or 50 GHz |
| NSI-RF-5994 |
RF Multiplier-Amplifier-Coupler Plate, 1-40 GHz
- Amplifier, 2x Multiplier, 40 GHz Coupler on Mounting Plate
- Manual band configuration, Single +15 V supply
- 2nd can be used to avoid moving for TX/RX
switching
- Can be upgraded at NSI factory to 50 GHz |
| NSI-RF-5994-P |
RF Multiplier-Amplifier-Coupler Plate, 1-20 / 26.5-40 GHz, Passive
- 20 GHz Amplifier, 4x Multiplier, 40 GHz Coupler on Mounting Plate
- Manual band configuration, Single +12 V supply
- Passive 4x multiplier covers 26.5 to 40 GHz |
| NSI-RF-5995 |
RF Multiplier-Amplifier-Coupler Plate, 1-50 GHz
- Amplifier, 2x Multiplier, 4x Multiplier, 50 GHz Coupler on Mtg
Plate
- Manual band configuration, Single +12 V supply
- 2nd unit can be used to avoid moving for TX/RX
switching |
Top
|
|
|
