.pdf version
 
    NSI-600C-22
 22' (6.7 m) Cylindrical Near-field Measurement System

DESCRIPTION

Model 600C-22 is a complete cylindrical near-field system ideal for measuring broad-beam (azimuth) antennas with apertures less than twenty-two feet making it ideal for testing stacked linear arrays, cellular and PCS antennas as well as higher frequency antennas with larger apertures. The 600C-22 consists of a vertical probe tower with an 22’ (6.7 m) travel, high capacity stepper motor based azimuth positioner, control computer, software and cabling. The high capacity probe stage can accommodate probes as large as a WR1500 including optional roll and translation stages.
CAPABILITIES

The system interfaces with a wide variety of RF equipment and is capable of measuring amplitude and phase patterns from L-band to mmWave Bands. The system includes NSI Antenna Measurement Software.

The system software runs on a Pentium based measurement workstation and provides automatic setup of scans based on measurement parameters and desired output. Measured data can be processed for far-field or holographic patterns yielding complete characterization of the antenna’s performance. A single data set provides information on antenna gain, side lobe structure, beam pointing and cross polarization.

The Model 600C-22 can be supplied with a variety of options to enhance system performance.
FEATURES
  • High Accuracy Y Linearity <0.004” (0.10 mm) RMS
  • 360° x 22’ (6.7 m) Cylindrical Scan Area
  • Precision Rack and Pinion Drive
  • L-band to mmWave Measurements
  • 10,000 lbs. (4,535 kg) load capacity Az positioner
  • Far-field, Near-field and Holographic Patterns

SPECIFICATIONS
Construction:. Steel tower and base; separate azimuth stage
Drive System: Precision stepper motor; rack and pinion
Scan Area: 360° in azimuth; 22’ (6.7 m) Y
Y-axis Linearity Uncorrected: <0.004” (0.10 mm) RMS
Resolution: 0.0015 azimuth; 0.002” (0.05 mm) Y
Position Repeatabilty <0.015 azimuth; 0.002" (0.05 mm) RMS Y
Scan Speed: 30°/s azimuth; 10in/s (.025 m/s) Y
Azimuth Stage Axial Load: 10,000 lbs (4,535 kg) max.
Probe Carriage Capacity: 175 lbs (80 kg) maximum recommended; WR1500
System Controller: NSI controller with serial and parallel I/O interfaces
Measurement Workstation: Measurement workstation computer with large LCD monitor.
Stepper Motor Power Amplifier: EIA 19” rack mount. (7” high x 14” deep)
Motor Cables: Quick-connect 40’ (12 m)
Probe: WR90 Open-ended Waveguide Probe SMA (f) transition & Pyramidal absorber (3")
Probe Absorber: Pyramidal Cone Absorber (8")
Probe Mount: Angle Bracket - allows mounting probe in “V” or “H” orientation.
RF Cables: Qty. 4- Flexible 15’ (4.5 m) with SMA (mm), Coaxial Termination; DC-18 GHz
Rotary Joint: Qty 1 - DC-18 GHz on Az stage
Supported RF Devices: NSI Panther Receiver Subsystem or selection of Agilent, Rohde & Schwarz and Anritsu VNA's (contact NSI for a complete list)
Power: 100-120/200-240 V AC, 50/60 Hz, 500 watts

DIMENSIONS

  • Width - 68.0" (1.73 m)
  • Depth - 104.2" (2.65 m)
  • Height - 318.9" (8.10 m)
  • System Weight - 4,200 lbs (1,905 kg) approx.








LINKS
  • No additional links are curently available.
    •
ORDERING INFORMATION

600C-22

22’ (6.7 m) Cylindrical Scanner System including azimuth and Y stepper motor driven scanner, 40’ (12 m) motor cable set, control processor, motor drive electronics, NSI Antenna Measurement Software, scanner absorber kit, X-band probe kit with probe absorber and mounting bracket, RF cables, installation tool kit, system documentation and operation manual.

OPTIONS

Opt 100 - 220VAC 50 Hz Operation
Opt 101 - European Version - CE Mark
Opt 102 - Delete X-band Probe
Opt 103 - Additional Operation and Maintenance Manual
NSI-RF-5485 - Scanner Absorber Kit
NSI-SC-5603 - Spherical Upgrade
NSI-SC-5621 - Probe Z-Stage, 9.75” translation
NSI-SC-5631 - Probe Roll Stage high capacity
NSI-SU-5601X - On-Site Installation and Training

For additional options and information see Scanner Options and Accessories
Nearfield Systems, Incorporated
19730 Magellan Drive, Torrance, CA 90502, USA, Tel: 310.525.7000, Fax: 310.525.7100
Email: sales@nearfield.com. Visit our website: www.nearfield.com